| Housing Styles |
AB
Enlarge Photo |
 |
Square Aluminum Block
- General purpose temperature sensing
- Accomodate a variety of sensing elements
|
| Type |
A |
B |
Customize |
| AB1 |
0.187" |
0.75" |
 |
| AB2 |
0.250" |
0.75" |
|
| AB3 |
0.250" |
1.25" |
|
|
back to top
|
AS
Enlarge Photo |
 |
Square Aluminum Block with Mounting Hole
- Useful for air temp or surface sensing
- Fast thermal response
|
| Type |
A |
B |
C |
D |
Customize |
| AS1 |
0.250" |
0.250" |
1.0" |
0.142" |
|
| AS2 |
0.250" |
0.75" |
1.0" |
0.189" |
|
| AS3 |
0.125" |
1.25" |
0.75" |
0.125" |
|
|
back to top
|
AT
Enlarge Photo |
 |
Closed End Aluminum Tube
- Air, surface or immersion sensing
- Thin wall for excellent thermal response
- Available with clear or black anodized finish
|
| [Customize this Housing Style] |
back to top
|
AX
Enlarge Photo |
 |
Square Aluminum Surface Sensor
- Useful for air temp or surface sensing
- Rugged housing with good thermal properties
- Easy to mount
- Shape allows for good thermal contact to flat surfaces
|
| Type |
A |
B |
C |
D |
E |
Customize |
| AX1 |
0.250" |
0.400" |
0.85" |
0.115" |
0.172" |
|
| AX2 |
0.250" |
0.265" |
0.400" |
0.062" |
0.147" |
|
| AX3 |
0.250" |
0.265" |
0.625" |
0.062" |
0.147" |
|
| AX4 |
0.250" |
0.265" |
0.735" |
0.062" |
0.147" |
|
| AX5 |
0.312" |
0.350" |
0.400" |
0.062" |
0.147" |
|
| AX6 |
0.312" |
0.475" |
0.400" |
0.062" |
0.203" |
|
|
back to top
|
AY
Enlarge Photo |
 |
Hex Aluminum Surface Sensor
- Surface sensing
- Typically used on power transistors in place of a mounting screw
|
| Type |
A |
B |
C |
D |
Customize |
| AY1 |
0.250" |
0.250" |
0.400" |
6-32 |
|
| AY2 |
0.312" |
0.250" |
0.400" |
6-32 |
|
| AY3 |
0.312" |
0.375" |
0.75" |
8-32 |
|
|
back to top
|
BB
Enlarge Photo |
 |
Brass Surface Mount
- General-purpose surface sensor
- Designed to be connected to surface with mounting clip or strap
|
| [Customize this Housing Style] |
back to top
|
BC
Enlarge Photo |
 |
Brass Curved Surface Sensor
- Surface sensing
- Designed to fit curvature of 3/8" to 5/8" tubing
- Accurate and fast response to temperature changes
- Mounting clip can be purchased separately
|
| [Customize this Housing Style] |
back to top
|
BT
Enlarge Photo |
 |
Closed End Brass Tube
- General-purpose, low-cost housing
- Can accommodate a wide variety of sensors
- Brass shell offers strength and responds quickly to temperature changes
- Available as nickel-plated or with no plating
|
| Type |
Plating |
A |
B |
Customize |
| BT1 |
Nickel |
0.185" |
1.25" |
|
| BT2 |
Nickel |
0.200" |
1.25" |
|
| BT3 |
Nickel |
0.231" |
1.25" |
|
| BT4 |
Nickel |
0.250" |
1.75" |
|
| BT5 |
None |
0.250" |
1.75" |
|
| BT6 |
Nickel |
0.375" |
1.75" |
|
|
back to top
|
BX
Enlarge Photo |
 |
Brass Housing with Integral Connector
- Designed for immersion sensing via threaded hole
- Integral connectors allow for compact size
- Mating cable assembly can also be provided
- Options include other connector types
|
| Type |
A |
B |
C |
D |
E |
Customize |
| BX1 |
0.250" |
1.0" |
0.620" |
1/4-18 NPT |
3/4" |
|
| BX2 |
0.188" |
0.75" |
0.400" |
1/8-27 NPT |
7/8" |
|
|
back to top
|
CF
Enlarge Photo |
 |
Copper Tube with Flange
- General-purpose housing used primarily for air sensing
- Rugged copper tube construction with brass flange
- Length from flange bottom to housing tip is 3.4" (TYP)
|
| [Customize this Housing Style] |
back to top
|
CP
Enlarge Photo |
 |
Clamp-On Tube Housing
- Designed to be mounted directly onto a metal tube
- Fits 3/8" tubes as well as 1/2" tubes
- Utilizes a standard #4-40 screw with a tinnerman fastener or hex nut
- Housing material is Tin-Plated Copper
|
| [Customize this Housing Style] |
back to top
|
CT
Enlarge Photo |
 |
Closed End Copper Tube
- General-purpose low-cost housing
- Can accommodate a wide variety of sensors
- Heat shrink tube is optional
|
| [Customize this Housing Style] |
back to top
|
CX
Enlarge Photo |
 |
Copper Tube with Brass Thread and Hex
- Designed for low-cost immersion sensing
- Brass hex and threads provide for a strong housing
- Copper tube minimizes cost
- Optional hex and thread sizes
|
| Type |
A |
Customize |
| CX1 |
0.138" |
|
| CX2 |
9.0" |
|
|
back to top
|
ET
Enlarge Photo |
 |
Epoxy Filled Tube
- Low cost, general-purpose design
- Small size allows for sensing in close areas such as motor windings
- Useful in areas where metal shell is not feasible
- Available in various sizes and materials according to sensor size and temperature specifications
- Can be assembled as a moisture resistant unit
|
| [Customize this Housing Style] |
back to top
|
HS
Enlarge Photo |
 |
Heat Shrink Sleeve
- Low cost, general-purpose sensor
- Tubing can be shrunk to the sensor or epoxy filled for strength
- Optional diameters, tubing lengths, and temperature ratings available
- Can be assembled as a moisture resistant unit
|
| [Customize this Housing Style] |
back to top
|
MC
Enlarge Photo |
 |
Sens-A-Coil Temperature Sensor
- Available to fit standard return bends to 3/8" coil tubing
- Easy installation - just snaps on
- Excellent thermal tracking
|
| [Customize this Housing Style] |
back to top
|
PS
Enlarge Photo |
 |
TO220 Plastic Surface Sensor
- Utilizes industry standard TO-220 package
- Ideal for automated assembly processes
- Can be used as a through-hole device or mounted to a heat sink
|
| [Customize this Housing Style] |
back to top
|
PT
Enlarge Photo |
 |
Closed End Plastic Tube
- General-purpose design
- Utilizes a molded plastic shell to house sensor
- Optional material types are available upon request
|
| Type |
A |
B |
Customize |
| PT1 |
0.150" |
1.0" |
|
| PT2 |
0.250" |
0.75" |
|
| PT3 |
0.250" |
2.0" |
|
| PT4 |
0.280" |
1.5" |
|
|
back to top
|
RC
Enlarge Photo |
 |
Closed End Ring Terminal
- Low-cost surface sensor design
- Large variety of sensors can be potted into a closed-end ring terminal
- Variety of barrel sizes and lengths available
|
| Type |
Barrel |
A |
B |
C |
Customize |
| RC1 |
Short |
0.285" |
0.625" |
#4 - #6 |
|
| RC2 |
Short |
0.375" |
0.78" |
#6 - #10 |
|
| RC3 |
Short |
0.530" |
1.0" |
5/16" |
|
| RC4 |
Insulated |
0.250" |
0.80" |
#6 |
|
| RC5 |
Long |
0.406" |
1.5" |
#10 |
|
| RC6 |
Long |
0.500" |
1.75" |
1/4" |
|
|
back to top
|
RT
Enlarge Photo |
 |
Open End Ring Terminal
- Low-cost surface sensor design
- Open ended ring terminal with epoxy that contains the sensing element
- Sensor is normally electrically isolated from the ring terminal
|
| Type |
A |
Customize |
| RT1 |
#6 |
|
| RT2 |
#10 |
|
|
back to top
|
SA
Enlarge Photo |
 |
Gas/Air Flow Sensor
- Designed for gas/air flow sensing
- Stainless steel construction
- Allows sensing element to be protected when directly exposed
|
| [Customize this Housing Style] |
back to top
|
SB
Enlarge Photo |
 |
Hex Head Bolt with Stainless Steel Tube
- Primarily intended for immersion applications
- Stainless steel housing with threads on backside of hex
|
| Type |
A |
Customize |
| SB1 |
0.125" |
|
| SB2 |
0.156" |
|
|
back to top
|
SF
Enlarge Photo |
 |
Flange Mount Stainless Steel Tube
- General-purpose flanged design
- Allows the assembly to securely attach to a mounting hole
|
| Type |
A |
Customize |
| SF1 |
0.137" |
|
| SF2 |
0.156" |
|
|
back to top
|
SG
Enlarge Photo |
 |
Two Hole Flange Mount Stainless Steel Tube
- General-purpose flanged design with 2 mounting holes for attachment
|
| Type |
A |
B |
Customize |
| SG1 |
0.187" |
1.0" - 12.0" |
|
| SG2 |
0.250" |
1.0" - 12.0" |
|
|
back to top
|
SL
Enlarge Photo |
 |
Closed End Flared Stainless Steel Tube
- General-purpose stainless steel housing
- Flared on open end
- Provides a defined stop in thru-hole applications
|
| Type |
A |
B |
C |
Customize |
| SL1 |
0.187" |
1.0" - 12.0" |
0.250" |
|
| SL2 |
0.250" |
1.0" - 12.0" |
0.288" |
|
|
back to top
|
ST
Enlarge Photo |
 |
Closed End Straight Stainless Steel Tube
- General-purpose housing
- Can accommodate a wide range of sensing elements
- Provides excellent protection to the sensing element from various environmental conditions
- Wide range of wall thicknesses
- Various grades of stainless steel
- Tubing can be altered/bent for retention purposes in a thermowell
|
| Type |
A |
B |
Customize |
| ST1 |
0.125" |
0.5" - 6.0" |
|
| ST2 |
0.156" |
1.0" - 9.0" |
|
| ST3 |
0.187" |
1.0" - 12.0" |
|
| ST4 |
0.205" |
1.0" - 12.0" |
|
| ST5 |
0.250" |
1.0" - 12.0" |
|
| ST6 |
0.375" |
1.0" - 12.0" |
|
|
back to top
|
SX
Enlarge Photo |
 |
Stainless Steel Hex Head Pipe Plug with Closed End Tube
- Designed primarily as an immersion type sensor
- Available in a wide variety of hex sizes, threads, and lengths
|
| Type |
A |
B |
C |
D |
Customize |
| SX1 |
0.125" |
0.5" - 6.0" |
1/8 - 27 NPT |
7/16" |
|
| SX2 |
0.156" |
1.0" - 9.0" |
1/8 - 27 NPT |
7/16" |
|
| SX3 |
0.187" |
1.0" - 12.0" |
1/8 - 27 NPT |
7/16" |
|
| SX4 |
0.250" |
1.0" - 12.0" |
1/8 - 27 NPT |
7/16" |
|
| SX5 |
0.125" |
0.5" - 3.0" |
1/4 - 18 NPT |
9/16" |
|
| SX6 |
0.156" |
1.0" - 9.0" |
1/4 - 18 NPT |
9/16" |
|
| SX7 |
0.187" |
1.0" - 12.0" |
1/4 - 18 NPT |
9/16" |
|
| SX8 |
0.250" |
1.0" - 12.0" |
1/4 - 18 NPT |
9/16" |
|
|
back to top
|
VC
Enlarge Photo |
 |
Closed End Vinyl Cap
- Low-cost, general-purpose design
- Suitable for narrow temperature ranges
- Allows for consistent profile for sensing element with minimal affect on response time
- Useful where the sensing unit needs protection from its environment, but not the strength of a metal shell
- Additional standard diameters and lengths available upon request
|
| [Customize this Housing Style] |
| back to top |
530-273-4608 
530-273-0769